Where Can I Get a Microfiche Read

The Library has a microfilm/fiche reader and scanner available for patrons to use; this automobile is located in the Music Drove. You can utilise the reader to view, relieve, impress, and electronic mail yourself images from microfilm/fiche.

Microfilm is a 35mm film on which printed materials are photographed at greatly reduced size for ease of storage. The digital lens on the microfilm reader enlarges the image, assuasive you to read the contents.

Microfiche is a card made of transparent film used to store printed information in miniaturized form. To read the carte, ane places it under the lens of a microfiche reader motorcar, which magnifies information technology.

The Library's Microfilm / Microfiche collections are in the following locations:

Master Flooring – Music Drove: Microfilm journals A-Z (including New York Times, and Times of London)

Lower Level – Exterior Compact Storage Room: Microfiche

Available by Request from Circulation Desk (In Storage): Congressional Record/Globe, Government Documents Microfilm and Microfiche

How to Apply the Microfiche/film Reader:

Powering On

1. Make certain the calculator and the Scan Pro 1100 reader is on. Plough on the power switch on the back of the Browse Pro 1100 until the greenish lite comes on.

ii. Open the PowerScan program from the Desktop or Windows Programs menu.

iii. Choose your desired picture show type. Our Library has 35mm microfilm and positive microfiche. Y'all may switch film types at any time by choosing the film option wizard at the top of the card.

Loading Flick

1. Extend the load tray fully by pulling information technology forward until the glass portion of tray lifts 45 degrees.

• For microfiche: Place the microfiche canvas direct on the glass tray
  
• For 35mm microfilm: When load tray is fully extended, a load guide will appear on screen. This animated guide shows you how to feed the pic through machine

  

• Later on film has been loaded, click the loftier speed fast forrad button to advance film to desired slide.

2. Push the load tray back into position until the glass panel closes. Adjust the tray past moving it left, right, forward or back to begin viewing the microfilm/fiche. In one case an image appears on screen, it is in position. (Tray may not need to be fully locked into position to view slide.) At this bespeak you lot may brainstorm focusing slide for meliorate image.

Adjusting Slides

Depending on the type of film you have selected, some options will or volition non be bachelor to y'all.

• If yous are using either positive or negative microfiche, you will non be able to fast forward or rewind. To view different slides within the microfiche, physically move the load tray in any direction, every bit needed.
  
• If y'all are using 35mm microfilm, utilize the fast forrad, rewind, and slider controls that appear on the reckoner screen.
  
• To adjust the paradigm, use tools in the "Adjust" tab on left side (machine effulgence, focus, zoom, magnifier etc )

Saving Scans

The greenish-dotted border around the images is your "file space." This "file space" represents the prototype you would like to save or print and can exist adjusted as needed.

ane. Make sure the prototype you wish to save fits into the file space.

2. Select the "Output" tab on the left-side carte

3. Cull "Browse to Bulldoze" and create a filename and destination for your browse. By default scans are saved to the "My Scans" folder on the Desktop. We recommend saving your scans straight to a USB flash drive instead.

4. Next, choose a file blazon. Scans tin be saved to many different file types.

• For printing, choosing PDF or OCR-readable PDF is your all-time option.
• OCR-readable PDF is platonic if you wish to brand an accessible scan.
• If you select multi-folio PDF, y'all will be given the option to add multiple scans to a single file.

6. One time your scans are saved, you can add them to a USB flash drive or e-mail them to yourself.

Printing

To print the file you've just created...

• Open up the file you've saved, simply as yous would practice with any other document.
• Impress using the File>Impress carte options.The standard printing prompts will come upwardly.
• Printed images will go to Xerox_Reference_BW, the black & white printers in the Reference Surface area of the Library.

OR

To print without saving a file...

• Select the "Output" tab from the left-side carte in the PowerScan awarding.
• Choose "Printer #1" from the Output menu. The standard printing prompts will come up, and you can print to Xerox_Reference_BW.
  

Finishing Upward

• Please remove all epitome files y'all saved to the figurer. Saved images will be deleted periodically.
• When you are finished, pull the tray all the fashion forwards and use the control carte to rewind the microfilm reel. If using microfiche, you can simply remove the fiche from the glass tray.
• You may return any microfilm/fiche that are checked out to yous at the Circulation Desk. If you did non cheque out the microfiilm/fiche simply simply retrieved it from the cabinets, delight place it on the shelving cart in the Music Collection. Delight do not reshelve the microfiche/picture show yourself.
• Don't forget your USB flash drive or your print-outs!

cernawerefurser.blogspot.com

Source: https://purchase.libanswers.com/faq/36771

Share this post